Products
Screw Steam Compressor
screw steam compressor—often referred to simply as an “MVR screw compressor”—is a compressor dedicated to water-vapor service and is widely used in Mechanical Vapor Recompression (MVR) evaporation, concentration, and drying systems. Its key task is to compress low-temperature, low-pressure secondary vapor (typically produced by self-evaporation or flash evaporation of the process liquid) to a slightly higher pressure, raising its saturation temperature to about 195 °C; the resulting higher-energy steam is then returned to the process as a heat source, enabling its reuse.
Features
- • Axial force balance / Radial force balance
- • Star wheel plate replacementcycle 100,000 hours
- • Bearing life is up to100,000 hours
- • Low operating noise
- • Low vibration and high reliabilityof the whole mac（Originally imported from Europe, a composite laminate ofglass fiber and resin, with high strength and good wearresistance. The maximum heat-resistant temperature canreach 200 degrees）
Why Choose Us ?
High Quality Control
AirHorse ensure every machine Runs well more than 15 years
Quickly Effect Shipment
Stock Available + Very Quickly Effect Shipment
24 Hours Service
24 Hours Service Always at your service
AirHorse is an internationally renowned manufacturer of screw air compressors, please contact us for more information on air compressors. For a long time to provide you with high quality air compression services.
Recommend
Belt Driven Screw Air Compressor 5-20HP
Belt-drive screw compressor 5-20HP: industry’s longest-running, most trusted design. Extra-long service life—15 + years
Direct Driven Screw Air Compressor 30-520HP
Classic stationary screw compressor line, covering 30 – 520 HP. A rigid direct coupling between motor and airend lifts efficiency by 5 – 8 %. This time-tested design is built to run for 15 + years.
Smart Screw Air Compressor 5HP-100HP
The economy-series 5–100 HP screw compressors are fixed-speed units, compact enough to save over 20 % of floor space, and deliver superior value at roughly 30 % lower cost.
Tank Mounted Screw Compressor 5-20HP
The Tank Mounted Screw Compressor 5–20 HP, integrates the compressor and tank within a single cabinet, eliminating external tanks and piping. It is truly plug-and-play—place it, wire it, and start producing air, slashing installation time by 70 %. The compact vertical design saves a further 30 % of floor space, leaving your shop layout far more flexible.
Request a Quote
Contact us for more information about our products information